Backlight - PeakTech 5220 Bedienungsanleitung

6.9. Unit
The unit of the displayed values (Including um, mm and mils) can be changed.
Switch the unit as below:
once to enter into menu mode ("Root" directory);
a. Press
b. Press or
c. Press or
d. Press or

6.10. Backlight

With dim lighting, the backlighting of the unit can be switched on for a better
reading of the display.
To turn on/off the backlight, press
Note:
The backlight increases the power consumption of the device.
6.11. Data Download
The user can use the USB cable to connect the meter to a PC and downloading
stored readings.
If the USB cable is connected, the
display.
If the device is connected for the first time to the PC, Windows will ask for the
necessary USB drivers for the device and install it. You can then install the
application software.
The USB driver, as well as the associated software can be found on the attached
CD.
to activate "Options" item, and press
to activate "Unit Settings" item, and press
to select intended item. Press
in the measurement mode.
icon will be displayed at the bottom of the
to confirm it.
-42-
once to enter in;
once to enter in;