PeakTech 5220 Bedienungsanleitung Seite 38

6.2. Measure Mode (Single or Continuous)
Single measure mode:
Single measure mode-Place the probe on sample vertically and rapidly, and after
one beep, raise it rapidly. Meanwhile, readings will be shown and statistics will be
upgraded and be shown.
Continuous measure mode:
Place the probe on sample, and don't raise the probe, the measurement will be
done continuously in a certain cycle.
Follow these steps to select the desired measure mode:
once to enter into menu mode ("Root" directory)
1.) Press
2.) Press
item.
3.) Press
select the item.
4.) Press
Note: The symbol „√ „ indicates current setting.
5.) Press
to activate „Options" item and press
or
to activate „Measure Mode" item and press
or
or to activate your intended item and press
to get back to measure mode.
-37-
once to select the
once to
.