Overview On Available Automatic Functions - Elsner Ws1 Bedienungsanleitung

The following ambient parameters are measured and displayed:
•
Outdoor and indoor temperature
•
Indoor humidity
•
Illumination (intensity and direction, twilight detection)
•
Wind speed
•
Precipitation
•
Time
The following additional options are available:
•
Connection of up to 8 Elsner wireless ventilation units WL610, WL305 and
WFL without accessory unit
•
Connection of an WGTH indoor sensor for separate temperature and
humidity measurement
•
Possibility to connect a motion detector
•
Connection of an external manual up-and-down key, which may be
assigned to any channel

Overview on available automatic functions

Automatic functions for windows/sliding roofs:
•
Opening if a selected indoor temperature is exceeded
•
Opening if a selected humidity is exceeded in the conservatory
•
Runtime adjustable from 1 second to 99 seconds with sliding roofs, or
when moving in stages
•
Rain alarm closes windows (may be switched off)
•
Wind alarm closes windows
•
Closing with the help of a motion detector
•
All window channels may be adjusted separately
The windows are closed if the set values are fallen below, or in case of an
activated rain alarm, wind alarm or motion alarm they are closed automatically.
All measured values, as well as status messages with regard to manual
operation or error messages are shown on the display.
74