Installation Of The Control; Housing Design And Connection Overview - Elsner Ws1 Bedienungsanleitung

Installation of the control

Housing design and connection overview

1 Microfuse T6,3A
2 Weather station, WG bus, manual key and motion detector
3 Channel 1
4 Mains supply 230 volt (L/N/PE)
5 Channel 2 (starting from version WS1-2)
6 Channel 3 (starting from version WS1-3)
7 Channel 4 (starting from version WS1-4)
8 Constant voltage 230 Volt
9 Multifunctional relay for alarm, heating or cooling system
(1 potential-free closer)
The unit operates with 230 V AC voltage 50 Hz, the rated input depends on the
number and performance of the connected motors. Each output must be loaded
with a maximum of 400 Watt. However, the total connected load must not
exceed approx. 1.6 KW. The output voltage amounts to 230 VAC.
103