Keep Warm Function; Memory Function - Gastroback 42435 Bedienungsanleitung

Note:
The shortcuts are available in standby mode only. Additionally, you must start
the heating process via the ON/OFF button within 6 seconds. Otherwise the
appliance will switch back to standby mode.
The following shortcuts are accessible.
Temperature
100°C
80°C
60°C

KEEP WARM FUNCTION

After heating, with the keep warm function activated, the appliance will switch to the
keep warm function automatically, keeping the set temperature for up to 30 minutes.
While the keep warm function is running, the ON/OFF button will be illuminated
in yellow. After 30 minutes in keep warm the heating elements will be deactivated
completely and the ON/OFF button will get dark (standby mode).
By simply pressing the KEEP WARM button, the keep warm function may be activated
or deactivated even while a heating cycle is running.
Note:
When you have set a temperature above 90°C the keep warm function will always
fall back to 90°C. This is because the water within the kettle will be vaporized too
quickly, when boiling for a long period of time, leading to a lot of steam escaping
from the appliance. Additionally, the water level could go down below the MIN
filling level, thus causing the risk of overheating and high loss of energy. In fact:
The higher the set temperature, the higher the energy consumption for keeping
warm will be.

MEMORY FUNCTION

The appliance will keep the recently set temperature in memory, even after switching
off and disconnecting the appliance from the power supply.
Shortcut
Hold the KEEP WARM button pressed for 2 seconds until 100 is shown on
the display.
Hold the temperature selection button and KEEP WARM button pressed
simultaneously for 2 seconds until 80 is shown on the display.
Hold the temperature selection button pressed for 2 seconds until 60 is
shown on the display.
35