PeakTech 9035 Bedienungsanleitung Seite 30

6. Set prices
In this energy cost meter can be set two different price
rates, which can be used to calculate costs in split day
and night tariff. This setting is valid for the whole week or
only selected weekdays. The value received is neutral
and therefore can be used worldwide.
6.1. Price 1 set:
Press the MODE button for about 5 seconds in the
•
voltage measurement, current measurement and
power measurement menu to activate the tariff
preferences.
Press the SET button to make the adjustment of the
•
cost of Price1.
The first digit (ten units of money per kWh) starts
•
flashing.
Press the ▲ key to change this value (e.g.: 0 -at a
•
rate of 00.25 € per kWh)
Press the SET button to the second digit (a unit of
•
money per kWh) input.
Press the ▲ key to change this value (e.g.: 0 -at a
•
rate of 00.25 € per kWh)
Press the SET button to select the third digit (0.1
•
unit of money per kWh).
Press the ▲ key to change this value (e.g.: 2 -at a
•
rate of 00.25 € per kWh)
-29-