Troubleshooting; Technical Specifications; Special Accessories - Kärcher SE 6.100 Betriebsanleitung

Clean flat fold filter
For heavy contamination:
Illustration
 Release the cover and fold it open, re-
move the flat fold filter and knock the
dirt out.

Troubleshooting

No water exiting from nozzle
 Fill up fresh water reservoir.
 Fresh water container sieve plugged.
 Thermal protection switch has switched
off the pump as it was overheated.
Switch off appliance and let it cool down
(approx. 20 - 30 min).
 Detergent pump defective, contact Cus-
tomer Service.
Spray stream uneven
 Clean the spray nozzle of the wash noz-
zle.
Insufficient vacuum performance
 Close the surrounding air separator at
the handle.
 Accessories, suction hose or suction
tubes are clogged, please remove the
obstruction.
 Filter bag is full, insert a new filter bag (
 for the order no. please see the spare
parts list at the end of the present in-
structions
 Flat fold filter is contaminated, use filter
cleaning mechanism, remove the flat
fold filter if heavily soiled and clean it
(see chapter "Cleaning flat fold filter").
Detergent pump noisy
 Fill up fresh water reservoir.
Strong foam generation in the
 Use the correct detergent from KÄRCH-
ER.
Appliance is not running
 Plug in the main plug.
18
container

Technical specifications

Voltage
1~50/60 Hz
Output P
nom
Output P
max
Mains fuse (slow-
blow)
Sound pressure level
(EN 60704-2-1)
Weight (without ac-
cessories)
Subject to technical modifications!

Special accessories

Filter set (5 pc.)
Flat fold filter
Washer nozzle for cleaning
upholstery
Carpet cleaner RM 519 (1 l
bottle)
International
Textile waterproofing-agent
Care Tex
RM 762
(0.5 l bottle)
International
– 11
EN
220 - 240 V
1200 W
1400 W
10 A
77 dB(A)
7,1 kg
Order No.
6.904-143.0
6.414-498.0
2.885-018.0
6.295-771.0
6.295-769.0