English
1
2
►
Insert the battery (1) in the battery compartment (2) and
press it home until it engages with an audible click.
Arrows (3) on battery (1) are still visible and battery (1) is
held securely in battery compartment (2). There is no
electrical contact between the saw and battery (1).
►
Push the battery (1) into the battery compartment (2) as far
as stop.
The battery (1) engages with a second click and is flush
with the saw's housing. Your chain saw is ready for
operation.
9.2
Removing the battery
►
Stand the saw on a level surface.
►
Press the locking lever (1).
The battery (2) is unlocked and can be removed.
68
3
2
1
10 Switching the Saw On/Off
10.1 Switching on
►
Hold the saw with your right hand on the control handle –
wrap your thumb around the control handle.
►
Disengage the chain brake, @ 8.2.
►
Hold the saw with your left hand on the handlebar – wrap
your thumb around the handlebar.
►
Depress the lockout button (1) with your thumb and hold it
there.
►
Pull the trigger switch (2) with your index finger and hold it
there.
The saw chain runs.
10.2 Switching off
►
Release the trigger and lockout lever.
The saw chain stops running.
10 Switching the Saw On/Off
1
2
MSA 120 C