Tap Installation - AEG MTH 350 Bedienung Und Installation

Installation
» Using pliers, break out the knock-out for the power
cable in the appliance cover. Correct the contours
with a file if necessary.
» Use the appliance back panel as a drilling template.
» Secure the appliance back panel to the wall with suit-
able rawl plugs and screws.
32


» Route the power cable through the cable entry in the
back panel.
» Hook in the appliance cover with the heater at the
bottom.
» Click the heater into place using the snap fastener.
» Secure the appliance cover with the cover fixing
screws.

Tap installation

Material losses
!
When making the connections, counter the torque
on the appliance using a size 14 spanner.
» Install the tap. For this, also observe the tap operat-
ing and installation instructions.
