Troubleshooting; Corrective Action; Repairs, Spare Parts - XciteRC ALPHA-EGG Bedienungsanleitung

Troubleshooting · Repairs, Spare Parts

Troubleshooting

Problem Possible Cause
Quadrocopter Weak Quadrocopter
does not connect Electromagnetic interference
to the remote Out of range
control
Propellers don't ON/OFF switch is OFF
move Weak Quadrocopter battery
Transmitter - model not bound
Quadrocopter Propellers damaged
doesn't take off Wrong propeller mounted
Propellers stops Weak Quadrocopter battery
suddenly, Quadro- Weak transmitter battery
copter chrashes
The Quadrocopter Gyro initialisation failure
does not react to
the remote control. Another radio controlled device using
Loss of control. the same channel
Transmitter - model not bound
Gyro initialisation neccessary
Quadcopter Weak Quadrocopter battery
doesn't flip

Repairs, Spare Parts

Normal wear and defective parts that result from an accident, are excluded from the guarantee. These in-
clude in particular:
For car models: bald tires, worn parts and drive gears, or bent / broken suspension, chassis or bodywork
For ship models: damaged or broken propellers, torn superstructure
For airplanes: damage due to improper transportation or crash
I If you find a part that is defective in material or workmanship right after opening the package, return - before
you used it – to your dealer or directly to us and we will send you a replacement.
For the ALPHA-EGG some parts are available as spares. In case of problems or questions, please contact
your dealer or:
XciteRC Modellbau GmbH & Co. KG - Service, Autenbachstrasse 12, D-73035 Göppingen, Phone +49 7161
40 799 50
Email: service@xciterc.de
Spare parts for the XciteRC ALPHA-EGG you may order in your local hobby shop or online at http://www.
XciteRC.com
XciteRC ALPHA-EGG

Corrective Action

Re-charge battery
Wait or change position
Move transmitter and quadcopter closer
together
Switch ON Quadrocopter
Re-charge battery
Rebind: first switch on the model, then the
transmitter
Replace propeller
Check rotating direction, see Chapter: Re-
placing propeller
Re-charge battery
Change transmitter batteries
Place the model on a flat surface when
switching on
Switch off another/own device or move to
another spot
Rebind: first switch on the model, then the
transmitter
Re-calibrate the model: see chapter mo-
del calibration
Re-charge battery
EN
31