Troubleshooting; Corrective Action; Repairs, Spare Parts - XciteRC Rocket260 Bedienungsanleitung

Troubleshooting

Problem
EN
Rotor don't move
Rotor stops sud-
denly, Quadrocop-
ter chrashes
The Quadrocopter
does not react to
the remote control.
Loss of control.
The Quadrocopter
flies uncontrollably

Repairs, Spare Parts

Normal wear and defective parts that result from an accident, are excluded from the guarantee. These in-
clude in particular:
For car models: bald tires, worn parts and drive gears, or bent / broken suspension, chassis or bodywork
For ship models: damaged or broken propellers, torn superstructure
For airplanes: damage due to improper transportation or crash
I If you find a part that is defective in material or workmanship right after opening the package, return - before
you used it – to your dealer or directly to us and we will send you a replacement.
For the Rocket 260 3D some parts are available as spares. If a part is defective or worn, you can identify it
with the help of the spare parts list at the end of this manual.
In case of problems or questions, please contact your dealer or:
XciteRC Modellbau GmbH & Co. KG - Service, Autenbachstrasse 12, D-73035 Göppingen, Phone +49 7161
40 799 50
Email: service@xciterc.de
Spare parts for the XciteRC Rocket 260 3D you may order online at http://www.XciteRC.com/
24
Possible Cause
ON/OFF switch is OFF
Weak Quadrocopter battery
Transmitter - model not bound
Weak Quadrocopter battery
Weak transmitter battery
Gyro initialisation failure
Quadcopter not bound to the trans-
mitter
Gyro calibration failure after a crash
Gyro calibration failure after a crash
Troubleshooting · Repairs

Corrective Action

Switch ON Quadrocopter
Re-charge battery
Rebind: first switch on the model, then the
transmitter
Re-charge battery
Change transmitter batteries
Place the model on a flat surface when
switching on
Re-bind: switch on the quadcopter first,
then the transmitter
Re-calibrate the gyro, see section: Get-
ting Started, gyro calibration
Re-calibrate the gyro, see section Getting
Started, gyro calibration
XciteRC Rocket 260 3D