Einführung Vielen Dank für den Kauf des Rocket 250 3D von XciteRC. Die vorliegende Bedienungsanleitung enthält wichtige Hinweise für den Betrieb Ihres neuen Modells. Lesen Sie deshalb, bevor Sie das Modell in Betrieb nehmen, alle Anweisungen dieser Bedienungsanleitung vollständig durch, damit Sie Ihr Modell gefahrlos betreiben können.
Seite 4
• Das Umbauen oder verändern des Modells ist aus Sicherheitsgründen und der CE-Zulassungsbestim- mungen nicht gestattet, das gilt im Besonderen für den Sender, Empfänger und Drehzahlregler. War- tungsarbeiten oder Reparaturen mit Originalersatzteilen sind hiervon ausgenommen. XciteRC Rocket 250 3D...
Lithium-Akku längere Zeit gelagert, kann er beschädigt werden. Die Firma XciteRC Modellbau GmbH & Co. KG kann den korrekten Umgang mit den von Ihnen verwendeten Akkus bzw. Batterien nicht überwachen, daher wird die Gewährleistung bei falscher Ladung oder Entladung ausgeschlossen.
Fernsteuersystem · Akku aufladen Das Fernsteuersystem Im Folgenden bekommen Sie einen Überblick über das Fernsteuersystem Ihres XciteRC Rocket 250 3D und über seine verschiedenen Funktionen und Einstellungen. Vor dem ersten Flug sollten Sie unbedingt alle diese Funktionen und Einstellungen gelesen und verstanden haben.
Die Flugzeit des Quadrocopters beträgt ca. 6-8 Minuten. Montage der Verstärkungsstreifen und Schutzbügel Um die Arme des Rocket 250 3D zu verstärken, sollten Sie die beiliegenden Verstärkungsstreifen wie in der Abbildung gezeigt um das äußere Drittel der Arme kleben. Zur Montage der Rotor-Schutzbügel gehen Sie wie folgt vor:...
• Geht der Flugakku zu Neige, beginnen die LED‘s an den Motorenauslegern zu blinken. Das Modell ist nun noch ca. 1 Minute steuerbar, suchen Sie einen geeigneten Landeplatz, um sicher zu landen. Laden Sie den Flugakku wieder auf. RC-Funktionen Mode 1 (Werkseinstellung) Mode 2 XciteRC Rocket 250 3D...
Wenn Sie nun den Steuerhebel zum Endanschlag (5) drücken, rollt das Modell in der Richtung des jeweiligen Hebelausschlags vorwärts oder seitwärts um die eigene Achse. LCD Display AUX2 L . H P R O XciteRC Rocket 250 3D...
Jeder Druck auf den Taster Foto macht ein Einzelbild, begleitet von einem kurzen Piepton. Drücken Sie Video, Di-Di ertönt, die Videoaufnahme startet, außerdem wird das Kamerasymbol im Display angezeigt. Drücken Sie den Videotaster erneut, die Aufnahme wird gestoppt. XciteRC Rocket 250 3D...
Foto Eingeblendet: Videoaufzeichnung aktiv Ausgeblendet: Videoaufzeichnung beendet Beleuchtung Drücken Sie den Steuerhebel, um die Beleuchtung des Rocket 250 3D ein- bzw. auszuschalten. Ist die Be- leuchtung an, wird eine Glühlampe im Senderdisplay angezeigt. LCD Display L . H E A S Y Landen: •...
Sie es - bevor Sie es benutzt haben - an Ihren Fachhändler oder an uns zurück und wir werden Ihnen Ersatz liefern. Für den XciteRC Rocket 250 3D sind einige Teile als Ersatzteile verfügbar. Ist ein Teil defekt oder verschlissen, können Sie es mit Hilfe der Ersatzteilliste am Ende der Anleitung identifizieren und neu erwerben.
Lagerung oder Entsorgung die Umwelt oder Ihre Gesundheit schädigen können. Batterien enthalten aber auch wichtige Rohstoffe wie z.B. Eisen, Zink, Mangan oder Nickel und werden wieder verwertet. Sie können die Batterien nach Gebrauch entweder ausreichend frankiert an uns zurücksenden: XciteRC Modellbau GmbH & Co.KG Autenbachstr. 12 D-73035 Göppingen oder in unmittelbarer Nähe (z.B.
All company and product names mentioned are trademarks of their respective owners. All rights reserved. Intended Usage The Rocket 250 3D is an electrically driven ready to run quadrocopter including motor and speed controller. The control is wireless with the included 2.4 GHz remote control. The model may only be operated on a suitable and sufficiently large room without obstacles or outdoor.
Seite 16
• Store batteries separately on a non-combustible surface. • The drive components (motor and speed controller) or the car battery may become hot during operation. WARNING: Risk of burns! Let these components cool down completely after the operation (and XciteRC Rocket 250 3D...
The XciteRC Modellbau GmbH & Co. KG cannot monitor the proper use of the battery or batteries you use, therefore, the warranty is excluded due to incorrect charging or discharging.
The remote control system Here you get an overview of the remote control system of your XciteRC Rocket 250 3D and its various fea- tures and settings. Before the first flight, you should absolutely have read and understood all these functions and settings.
The flight time of the Quadrocopter is about 6-8 minutes. Installation of the reinforcing strips and propeller guard To reinforce the arms of the Rocket 250 3D, adhere the reinforcing strips attached to the outer third of the arms as shown in the Figure.
• If the flight battery runs low, the LEDs on the motor mounts starts flashing. From now on the model is con- trollable for one more minute only. Find a suitable landing spot and land. Charge the flight battery again. RC functions Mode 1 (factory setting) Mode 2 XciteRC Rocket 250 3D...
The Headless mode is activated by pressing the control lever, a beep indicates the function. As long as this beep appears, the Headless mode is active. Press the control lever again to deactivate the headless mode. Press XciteRC Rocket 250 3D...
ON: Video recording OFF: Video recording stopped Illumination Press the control lever to switch the lighting of the Rocket 250 3D on or off. Is the lighting on, a bulb appears in the transmitter sreen. LCD Display L . H...
• Switch of the Quadrocopter and then the transmitter. WARNING: the motor of the XciteRC Rocket 250 3D may get very hot during operation. Allow to cool down minimum 20 minutes before the next start to avoid damage. Fire hazard!
Seite 24
– to your dealer or directly to us and we will send you a replacement. For the Rocket 250 3D some parts are available as spares. If a part is defective or worn, you can identify it with the help of the spare parts list at the end of this manual.
Batteries also contain important raw materials such as iron, zinc, manganese or nickel and can be recycled. You can send us back the batteries after use either sufficient postage: XciteRC Modellbau GmbH & Co.KG Autenbachstr. 12 D-73035 Göppingen returned free of charge or in close proximity (eg in trade or municipal collection).
Conservez le pour votre lecture mais aussi remettez cette documentation à tierce per- sonne si vous décidez de prêter ou vendre le Rocket 250 3D. Notre garantie ne couvrira aucun dégât ou mauvais fonctionnement en cas de non-respect du mode d’emploi et des consignes de sécurité.
Seite 28
(récepteur, variateur et servo) et les accumulateurs Lithium ne sont pas étanches. Ne faites jamais voler le modèle par temps de pluie ou de brouillard dense, ne le faites pas rouler sur l’herbe humide et ne XciteRC Rocket 250 3D...
, sera endommagé. La société XciteRC Modelbau GmbH & Co.KG ne peut pas contrôler la manipulation des accus faite par l’utilisateur et de ce fait, ne peut pas être tenue responsable d’une mauvaise opération de chargement ou déchargement.
– Risques d’incendie et d’explosion! COM P U TE R U S B Chargeur USB LiPo-Akku • Branchez la prise USB sur un PC ou sur une alimentation appropriée. La LED rouge de la prise est allu- mée. XciteRC Rocket 250 3D...
Le temps de parcours de Rocket 250 3D est d‘environ 6-8 minutes. Montage des bande de renfort et des arceaux de protection Pour renforcer les bras du Rocket 250 3D, il est conseillé de coller les bandes de renfort, comme indiqué sur la vue ci-dessous, sur le tiers extérieur des bras.
• Si l’accu de vol arrive en fin de charge, les LEDs fixées sur les bras se mettent alors à clignoter. Le temps de vol sera alors limité à env. 1 minute, recherchez sans tarder un endroit pour atterrir en toute sécurité. Rechargez l’accu de propulsion. Fonctions RC Mode 1 (réglage par défaut) Mode 2 XciteRC Rocket 250 3D...
Si vous appuyez sur Vidéo, vous entendrez Di-Di et l’enregistrement vidéo se lance, de plus, le symbole de la caméra s’affichera à l’écran. Le fait d’appuyer une nouvelle fois sur la touche Vidéo, stoppe l’enregistrement. XciteRC Rocket 250 3D...
état de marche et ne s’use qu’avec modération. • L’ Rocket 250 3D est étanche, il se peut néanmoins que quelques gouttes d’eau s’infiltrent dans le ba- teau. C’est pourquoi, après chaque séance, vérifiez si de l’eau s’est accumulée au fond de la coque, si c’est le cas, asséchez avec un chiffon.
être recyclés. Vous pouvez nous renvoyer les piles et les accumulateurs par poste suffisamment affranchie à l’adresse ci-dessous : XciteRC Modellbau GmbH & Co.KG Autenbachstr. 12 D-73035 Göppingen Ou vous pouvez les remettre gratuitement au point de collecte le plus proche de chez vous (par exemple, dans la distribution ou dans les containers de récupération de piles de votre commune).
Seite 38
Propeller guards Rocket 250 3D (4) USB charging cable Rocket 250 3D LiPo Battery 3.7 V 650 mAh Rocket 250 Protection des hélices Rocket 250 3D (4) Cordon de charge USB Rocket 250 3D Accu LiPo 3.7 V 650 mAh Rocket 250...
Die ausführliche Konformitätserklärung finden Sie im Internet unter www.XciteRC.com beim jeweiligen Produkt unter dem Link Konformitätserklärung oder per E-Mail: info@xciterc.de. The XciteRC Modellbau GmbH & Co. KG declare that this product complies with the essen- tial requirements and other relevant regulations of the directives R&TTE 1999/5/EC and RoHS 2011/65/EC.
Seite 41
A: Stärke des Videosignals B: Anzeige Video-Kanal C: Ladestandanzeige Monitor D: Video - ist die Aufnahme aktiv, wird ein roter Punkt angezeigt E: Foto - wird der Auslöser gedrückt, wird ein roter Punkt angezeigt F: microSD-Karte eingelegt ja/nein XciteRC Rocket 250/260 FPV-Set...
Seite 42
C: Charge indicator monitor D: Video - when video recording is active, the icon switches to a red dot E: Photo - while pressing the shutter, the icon switches to a red dot F: microSD-Karte inserted yes/no XciteRC Rocket 250 3D...
Seite 43
B: Voie C: Indicateur d‘état de l‘ecran D: Vidéo - est l‘enregistrement en vidéo actif, un point rouge apparaît E: Photo - presser le gâchette de déclenchement, un point rouge apparaît F: microSD mise en place oui/non XciteRC Rocket 250/260 FPV-Set...
Seite 44
Li-Po • Li = Lithium Die XciteRC Modellbau GmbH & Co. KG erklärt hiermit, dass dieses Produkt den grundlegenden Anfor- derungen und anderen relevanten Vorschriften der Richtlinie R&TTE 1999/5/EC entspricht. Die ausführliche Konformitätserklärung finden Sie im Internet unter www.XciteRC.com beim jeweiligen Pro- dukt unter dem Link Konformitätserklärung oder per E-Mail: info@xciterc.de.
Seite 45
Li-Po • Li = lithium The XciteRC Modellbau GmbH & Co. KG declare that this product complies with the essential require- ments and other relevant regulations of the directives R&TTE 1999/5/EC. The detailed Declaration of Conformity can be found at www.XciteRC.com at the respective product link Declaration of Conformity or via E-mail: info@xciterc.de.
Seite 46
Li-Po • Li = Lithium La société XciteRC Modellbau GmbH & Co. KG déclare que cet article est conforme aux directives CE R&TTE 1999/5/EC. Vous trouverez la déclaration de conformité détailée sur internet, sous www.XciteRC.com, sur la page de l‘article en question , sous le lien de la Déclaration de conformité ou e-mail: info@xciterc.de.