Trim; 3D Flip; Speed - XciteRC ALPHA-EGG Bedienungsanleitung

Trim

Transmitter
EN

3D flip

Once you are familiar with the aforementioned maneuvers, you can venture to flips and rolls. Fly at least 1.5
m high, and then press the left transmitter button. A sound indicates that the mode is active. Now move the
right control lever to the desired direction and the model rolls once around its own axis.
NOTE: If the flight battery is too weak, the flip can no longer be flown.

Speed

26 26
ALPHA-EGG
forward
backward
roll to the
left
The ALPHA-EGG comes with 3 speed levels. Press the right transmitter button during
the flight and the Quadrocopter becomes faster. For acoustic confirmation the transmit-
ter beeps twice. Press again, to fly a little faster - the transmitter beeps 3-times. Press
again to return to slower flight - the transmitter beeps once.
Trim forward - reverse
When hoovering, the Quadrocopter must stand
in place. If it moves forward, move the trim
button down until it stops, or vice versa.
roll to the
Trim left - right
right
When hoovering, the Quadrocopter must stand
in place. If it moves to the right, move the trim
button to the left until it stops, or vice versa.
Trim · 3D flip · Speed
Remarks
XciteRC ALPHA-EGG