Environmental Protection; Technical Data - Kawasaki 603.010.010 Originalbetriebsanleitung

- Keep the ventilation openings on the machine
GB
clean and free of blockages at all times.
- Check regularly whether dust or foreign
particles have got into the ventilation grille next
to the motor and in the area around the release
switch. Remove the accumulated dust with a soft
brush. Wear safety goggles when cleaning these
areas.
- Grease all moving parts at regular intervals.
- Clean the machine's housing, if necessary, using
a soft damp cloth. A mild detergent may be used
but never use alcohol, petrol or other aggressive
cleaning product.
- Never use discharging agent to clean plastic
parts.
CAUTION. Ensure that no water gets into the
machine.
3. GENERAL INSPECTION
Check at regular intervals that all the securing
screws a firmly tightened. Pay special attention to
the external flange. The screws may come loose
over time due to vibration.
Check the machine's mains cable and all the
extension cables you use for signs of damage at
regular intervals. Have the mains cable replaced
by an authorised outlet.
Replace damaged extension cables.
4. LUBRICATION
After extended use the oil in the machine's
gearbox must be changed. Contact an authorised
outlet for this purpose.

13. Technical data

This machine has double insulation. It has two
independent insulations to protect you from
electric shocks.
Voltage:
Rating:
Idling speed:
Saw blade:
Angle of mitre bench:
Straight cut at 0° x 0°:
Mitre cut at 45° x 0°:
Vertical angle cut at 0°x 45°(L): 120 mm x 30 mm
Vertical angle cut at 0°x 45°(R): 120 mm x 25 mm
Combined mitre cut at
45°x 45°(L):
45°x 45°(R):
Weight:
DETAILS OF NOISE AND VIBRATION
DEVELOPMENT
A-rated noise level L
A-rated noise rating L
Vibrations:
Use only the accessories and spare parts
recommended by the manufacturer. If the device
suffers a failure despite our quality controls and
your care, have repair work carried out only by an
authorised electrician.

14. Environmental protection

sales outlet.
230-240 V~/50 Hz
24
0 210 mm x 16 x 2.8 mm, 24 T
120 mm x 55 mm
:
PA
:
WA
End of life electrical equipment must not
be placed in household waste. Please take
it to a return point. Find out about your
nearest return point from your council or
1300 W
5500 rpm
-45°/0°/+45°
83 mm x 55 mm
83 mm x 30 mm
83 mm x 25 mm
8 kg
99 dB(A)
115 dB(A)
2
1,739 m/s