Safety Instructions And Warnings; Description Of Symbols - Kawasaki 603.010.010 Originalbetriebsanleitung

1. Safety instructions and warnings

The equipment complies with the safety
regulations required for electrical equipment.
Read through the instructions for use before
starting up the equipment.
Improper use can lead to personal injury and
property damage. Persons, who are not familiar
with the instructions, may not operate the
equipment. Keep the instructions for use in safe
custody. Children and youths are not permitted
to operate the equipment.

2. Description of symbols

Pay attention to all the signs and symbols shown
in these instructions and on your tool. Make a
note of these signs and symbols. If you interpret
the signs and symbols correctly, your work with
the machine will be safer and better.
Important.
Do not look straight into the laser.
Laser class II
Attention!
Read the instructions for use before
starting the machine.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear gloves.
Double insulated for additional
protection.
In accordance with essential
applicable safety standards of
Europen directives
3. Accessories
This CROSSCUT AND MITRE SAW WITH DRAG
FUNCTION is supplied with the following
accessories:
• Saw blade with 24 teeth (fitted)
• Chip bag
• Clamping device
• Side support (2x)
• 4 mm hexagonal wrench for bench stop (1x)
• 6 mm hexagonal wrench for changing the saw
blade
4. Machine components (A1-4)
1. Laser
2. ON/OFF switch for the laser light
3. Laser cover
4. Laser adjustment
5. Sawing arm
6. Release knob
7. Control lever
8. Carry handle
9. Top safety hood (fixed)
10. Moving safety hood
11. Safety hood control arm
12. Cover for saw blade screws
13. Chip bag
14. Vertical angle lock
15. Vertical angle scale
16. Stop
17. 6 mm hexagonal wrench
18. Mitre bench
19. Mitre scale
20. Bench insert (slotted plate)
21. ON/OFF switch for machine
22. Lock for clamping device
23. Spindle locking button
24. Connection for dust extractor
25. Side supports (2x)
26. Setting screw for sawing head angle
27. Release lever for saw blade guard
28. Stopper for 90° lock
29. Mitre angle lock
17
GB