Safety Instructions - Kawasaki 603.010.060 Originalbetriebsanleitung

17.Bevel scale
GB
18.0° Bevel adjuster
19.Fence
19A/19B Fence
20.Side support bar clamping levers
21.Mitre table
22. Mitre scale pointer
23.Table insert (kerf plate)
24.Switch trigger
25.Mitre lock
25A Locking button
26.Spindle lock
27.Dust extraction port
28.Slide bars
29.Slide lock
30.Trenching depth adjustment screw
31.Trenching stop
32.Trenching depth lock nut
33. 45° Bevel adjustment screw (left)
34. 45° Bevel adjustment screw (right)
35. Back handle
36.Side support bars (x2)
37.Side support bar location holes (2 sets)
38. Side support bar stop screws (inside)
39.Stabilizer bar
40.Flange wrench
41. Side support fence (x 2)
42.Saw blade
43.Ready indicator
44.Work light
45. Fence lock

SAFETY INSTRUCTIONS

WARNING! When using electric tools. Basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury.
Including the following.
Read these instructions before operating this
product and save these instructions.
1. keep work area clean
- Cluttered areas and benches invite injuries.
2. Consider work area environment
- Do not expose power tools to rain. Do not use
power tools in damp or wet locations. Keep work
area well lit. Do not use power tools where there
is risk to cause fire or explosion.
3. guard against electric shock
- Avoid body contact with earthed or grounded
surfaces (e.g. pipes, radiators, ranges,
refrigerators).
4. Keep children away
- Do not let visitors touch the tool or extension
cord. All visitors should be kept away from area.
5. Store idle tools
- when not in use, tools should be stored in a dry,
high or locked up place, out of reach of children.
6. Do not force the tool
- It will do the job better and safer at the rate for
which it was intended.
7. Use the right tool
- Do not force small tools or attachments to do
the job of a heavy duty tool. Do not use tools for
purposes not intended.
8. Dress properly
- Do not wear loose clothing or jewellery, they
can be caught in moving parts. Rubber gloves
and nonskid footwear are recommended when
working outdoors. Wear protecting hair coveing
to contain long hair.
9. Use safety glasses
- Also use face or dust mask if the cutting
operation is dusty.
10. Connect dust extraction equipment
- If devices are provided for the connection of
dust extraction and collection facilities ensure
these are connected and properly used
11. Do not abuse the cord
- Never carry the tool by the cord or yank it to
disconnect it from the socket. Keep the cord
away from heat, oil and sharp edges.
12. Secure work
- Use clamps or a vice to hold the work. It is safer
than using uour hand and it frees both hands to
operate the tool.
28