Ups Startup - Eaton Powerware 5140 Installationsanleitung

UPS Startup

Perform the following steps to start up the UPS:
Powerware 5140 Installation Guide for IBM Applications
®
1. Locate the UPS front panel (shipped in a separate box).
2. Attach the UPS front panel interface connectors to the chassis.
Lift the front panel into place and secure to the chassis with the
attached screws. See Figure 15 and Figure 16.
Figure 15. Installing the UPS Front Panel
05146790 A Uncontrolled Copy
S
Figure 14. The PDU
Installation
13