Product Description And Specifications - Bosch GKS 160 Professional Originalbetriebsanleitung

OBJ_BUCH-185-005.book Page 16 Wednesday, March 5, 2014 9:54 AM
16 | English
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for lengthways and crossways cut-
ting of wood with straight cutting lines as well as mitre cuts in
wood while resting firmly on the workpiece. With suitable saw
blades, thin-walled non-ferrous metals, e.g., profiles, can
also be sawed.
Working ferrous metals is not permitted.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 On/Off switch
2 Lock-off button for On/Off switch
3 Auxiliary handle (insulated gripping surface)
4 Spindle lock button
5 Scale for mitre angle
6 Allen key
7 Wing bolt for bevel-angle preselection
8 Wing bolt for parallel guide
9 Cutting mark, 45°
10 Cutting mark, 0°
11 Parallel guide
12 Retracting blade guard
13 Riving knife
14 Base plate
15 Wing bolt for bevel-angle preselection
16 Sawdust ejector
17 Blade guard
18 Handle (insulated gripping surface)
19 Clamping bolt with washer
20 Clamping flange
21 Saw blade*
22 Mounting flange
23 Saw spindle
24 Screw for attachment of riving knife
25 Clamping lever for cutting-depth preselection
26 Cutting-depth scale
27 Set of screw clamps*
28 Extraction adapter
29 Guide-rail adapter*
30 Guide rail*
31 Connection piece*
32 Vacuum hose*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
2 609 932 923 | (5.3.14)
Technical Data
Circular Saw
Article number
Rated power input
No-load speed
Rotational speed under load,
max.
Riving knife thickness, max.
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
Spindle lock
Base plate dimensions
Saw blade diameter, max.
Saw blade diameter, min.
Blade thickness, max.
Tooth thickness/setting, max.
Tooth thickness/setting, min.
Mounting bore
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 95 dB(A); Sound power level
106 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2
Cutting wood: a =2.5 m/s , K=1.5 m/s
h
2
Cutting metal: a =4 m/s , K=1.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
GKS 160
3 601 F70 0..
W 1050
-1
min 5600
-1
min 4000
mm 1.8
mm 54
mm 38

mm 146 x 290
mm 160
mm 150
mm 1.7
mm 2.6
mm 2.0
mm 20
kg 3.6
/ II
2
,
2
.
Bosch Power Tools