General description
The illustrations can be found
on the front and rear fold-out
pages.
Scope of delivery
Unpack the equipment and check that it is
complete. Dispose of the packaging mate-
rial correctly.
•
Appliance
•
Full-rim diamond cutting disc
•
Protective cover
•
Parallel stop
•
Angle stop
•
Wrench
•
Mounting material
•
Translation of the original instructions
for usel
Function description
The tile cutting machine is equipped with a
full-rim diamond cutting disc and a workta-
ble. It is suitable for cutting tiles. The use of
water is essential.
For the function of the operating parts,
please refer to the descriptions below.
Summary
1 Wrench of nut
2 Wrench of shaft
3 Protective cover
4 Work surface, foldable
5 On switch
6 Off switch
7 Carry handle
8 Measuring scale
9 Parallel stop
10 Mains cable
11 Angle stop
12 Power cord holder
13 Shaft
14 Mounting flange
15 Full-rim diamond cutting disc
16 Pressure disc
17 Shaft nut
18 Protective cover of the cutting
disc
19 Nut
20 Protective cover
21 Screw with star grip
22 Retaining bracket
23 Screw
24 Closure
25 Drain hole
Technical specifications
Nominal input voltage ......230 V~, 50 Hz
Power consumption ..................... 500 W
Measurement idling speed n
Safety class .......................................... I
Mechanical rating .......................... IP 44
Weight .......................... approx.
Depth of cut 90° ..................max. 25 mm
Depth of cut 45° ..................max. 16 mm
Sound pressure level
(L
) ....................... 94 dB(A); K
pA
Sound power level (L
measured .............104 dB(A); K
guaranteed ......................... 107 dB(A)
Cutting disc:
Idling speed n
0
................................... max.13200 min
Disc speed ....................... max. 80 m/s*
Outer diameter ................... Ø 115 mm
Bore hole .......................... Ø 22,2 mm
*
The grinding disc must keep a rotational
speed of 80 m/s.
GB
... 5400 min
0
4.7 kg
=3 dB
pA
)
wA
=3 dB
wA
-1
-1
19