General Power Tool Safety Warnings; Work Area Safety - Parkside PMK 550 A1 Originalbetriebsanleitung

Total vibration values
(vector total of three directions) determined in
accordance with EN 62841:
Cutting of sheet metal
Uncertainty
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparing one power tool with another .
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate .
WARNING!
► Depending on the manner in which the
power tool is being used, and in particular
the kind of workpiece being worked on,
the vibration and noise emission values can
deviate from the values given in these instruc-
tions during actual use of the power tool .
► Try to keep the vibration load as low as
possible . Measures to reduce the vibration
load are, e .g . wearing gloves and limiting the
working time . Wherein all states of operation
must be included (e .g . times when the power
tool is switched off and times where the
power tool is switched on but running without
load) .
PMK 550 A1
a = 8 .7 m/s
2
h
K = 1 .5 m/s
2
►
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery operated (cordless) power tool .

1 . Work area safety

a) Keep work area clean and well lit.
b) Do not operate power tools in explosive atmos-
c) Keep children and bystanders away while
General power tool
safety warnings
WARNING!
Read all safety warnings, instructions,
illustrations and specifications provided
with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury .
Cluttered or dark areas invite accidents .
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes .
operating a power tool. Distractions can cause
you to lose control .
GB │ IE │ 3 ■