Package Contents; Parts Description - Parkside PPSK 40 A1 Bedienungs- Und Sicherheitshinweise

Introduction
Following hazards may occur in conjunction
with the construction and design of this
plasma cutter:
Eye injuries due to glare,

Touching hot parts of the device or

workpiece (burn injury),
In case of improper protection risk of

accident and fi re through sparks and
slag particles,
Harmful emissions from smoke and gases

if there is a lack of air or if closed rooms
are insuffi ciently extracted.
Reduce the residual risk by carefully using
the device as intended and observing all
instruction.

• Package contents

1 plasma cutter with integrated compressor
1 ground cable with terminal
1 cutting cable incl. cutting torch
3 electrodes (1 pre-assembled)
1 set of operating instructions
3 burner sleeves (1 pre-assembled)
1 Removable roller guide
1 compressed air hose

• Parts description

PLEASE NOTE!
 After unpacking the product, please
check that all of the package contents
are present and that the device is in
perfect condition. Do not use the device
if it is defective.
8 GB/CY
1
Plasma cutter with integrated compressor
2 Handle
3 Mains plug
4 Ground terminal
5 Ground terminal plug
6 Plasma burner power plug
7 Plasma burner plug
8
Plasma burner
8a Plasma burner button
8b Nozzle clamping sleeve
8c Torch sleeve
8d Electrode
8e Diffuser
9 Overheat protection indicator lamp
10
Selector switch for compressed air
supply
11 Plasma burner power socket
12 Ground terminal connection socket
13 Plasma burner connection socket
14 Current controller
15 Mains indicator lamp
16
On/off - switch
I switched on
O switched off
17 External compressed air access
18 Toggle switch for external compressed
air
19 Removable roller guide
Locking screws
19a
Fixing screws
19b
Guide rollers
19c
Compressed air hose
20