Vestamatic Rolltec Pro Bedienungsanleitung Seite 19

83100811.qxd 11.09.01
Rolltec Pro
Installation and Operating Instructions
12:17 Seite 37
Congratulations for buying the Vestamatic Rolltec Pro roller shutter control. You
have purchased a high-quality product that features many practical programming
options and has been manufactured according to the highest quality standards which
will guarantee optimum efficiency and reliability. Please take the time to read these
operating instructions carefully before starting up. We have tried to make sure that all
programming instructions are easy to understand.
Safety precautions
· Check the control for any signs of damage immediately after unpacking. Do not
start up the control in case there is any damage. If there is damage due to the
shipping, please notify the supplier immediately.
· Please note that the Vestamatic Rolltec Pro roller shutter control requires
an operating voltage of 230 VW, 50 Hz. Make sure to contact a professional elec-
trician for the installation.
· The control was designed for correct use as described in the operating instruc-
tions. Any changes or modifications thereof are not permissible and result in loss
of all warranty claims.
· If safe operation of control or roller shutter can not be guaranteed, the Vestamatic
Rolltec Pro must be turned off immediately and protected against unintentional
operation. The same applies for work on windows or roller shutters that are oper-
ated by this control.
- 36 -
G