Automatic Mode; General - Vestamatic Rolltec Pro Bedienungsanleitung

83100811.qxd 11.09.01

Automatic mode

Press the selector button until the display indicates (AUTO) in order
to activate the automatic mode.
The automatic mode is now activated and the roller shutter will move
up and down at the programmed times. Regardless of the pro-
grammed times, it is still possible to move the roller shutter up and
down by pressing the up or down button and the programming
remains unaffected.
If you press the up or down button longer than 2 seconds, the roller
shutter moves up or down.
Simply press the opposite button to stop the motion, i.e.:
· press the down button, if the roller shutter is moving up,
· press the up button, if the roller shutter is moving down.
The roller shutter will only move up or down again after the up or
down button has been pressed.
By simply setting the selector button to manual mode (MAN), the
automatic mode can be interrupted for an extended period of time.
After selecting automatic mode again, the Vestamatic Rolltec Pro
roller shutter control will execute the last pending command from the
automatic mode. The last pending command will also be executed
when resetting after power failure.
12:17 Seite 43
Introduction
- 41 -
Programming the basic functions
After the installation has been completed correctly (for instructions
please see pages 63 to 66), you can start programming. All featured
functions are now ready to be operated.
Important: Please note that the Vestamatic Rolltec Pro roller shutter
control cannot be programmed in case of power failure.
Carefully pull to remove the cover cap and press the reset button with
a ball-point pen or something else suitable.
Pressing the reset button will activate default times pre-programmed
by the manufacturer. Also press the reset button, if you want to enter
completely new settings or delete the existing data for some other
reason.
Times pre-programmed by the manufacturer:
· Current time – 0ß8:0ß0
· Up time – 0ß6:0ß0
· Down time – 2ß0:0ß0
On the following pages, you will find instructions how to customize
these times to your personal requirements.
G G

General

- 42 -