Electrical Connection; Cleaning & Maintenance - Litecraft ZX. 6 Bedienungsanleitung

Electrical
Connection
• Connection to the mains is only allowed by skilled persons.
• Before connecting the fi xture to the mains, assure that the specifi cations are corresponding.
• Electrical grounding has to be used in the whole installation!
ATTENTION!
Installation has to be approved by an authorized person before fi rst operation!
Cleaning &
Maintenance
• Installer has to take care of all safety and machinery installations are approved by skilled persons at least once a year.
• Installer has to take care of all safety and machinery installations are approved by authorized persons at least every four
years during the acceptance inspection. Following points need to receive special attention:
• All screws used for mounting the fi xture or parts of it need to be proof and must not show corrosion.
• Housing, Suspension device and installation site (ceiling, suspension, truss) must not show deformation.
• All power cords must not show any damage, aging (for example porous wires) or sediments. Other, to the
location related and usage aligned regulations will be observed by the skilled person and safety defects
will be fi xed.
ATTENTION!
Make sure that the fi xture is disconnected from mains during all maintenance! Is it important to unplug mains connector!
• The fi xture must be regularly cleaned from dirt and dust. Only use a wetted, lint-free cloth for cleaning the fi xture. Never
use alcohol or any kind of solvent for cleaning.
• Inside the fi xture there are no parts which need maintenance. Maintenance & service must be done by authorized
dealers only. Only use original spare parts!
Advice!
If you have further questions, your local dealer will be happy to help you.
17