Progress PVS 1540 Benutzerinformation Seite 20

20 progress
5. Processing residues can stay in the ap-
pliance. Start a programme to remove
Adjusting the water softener
German
degrees
(°dH)
47 - 50
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
How to adjust the level of the water
softener
1. Press the on/off button to activate the
appliance. Make sure that the appliance
is in setting mode, refer to "Setting and
starting a programme".
2. Press and hold, at the same time, but-
ton and button
tors of buttons
start to flash.
3. Press button
• The indicators of buttons
go off.
Water hardness
French mmol/l
degrees
(°fH)
84 - 90 8.4. - 9.0
76 - 83 7.6 - 8.3
65 - 75 6.5 - 7.5
51 - 64 5.1 - 6.4
40 - 50 4.0 - 5.0
33 - 39 3.3 - 3.9
26 - 32 2.6 - 3.2
19 - 25 1.9 - 2.5
7 - 18 0.7 - 1.8
< 7 < 0.7
until the indica-
, and
.
and
them. Do not use detergent and do not
load the baskets.
Clarke
degrees
58 - 63
53 - 57
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
• The indicator of button
ues to flash.
• The current setting of the water soft-
ener is indicated by intermittent
acoustic signals and the number of
flashes of the indicator
– E.g. 5 acoustic signals and 5 flash-
es + pause + 5 acoustic signals
and 5 flashes = level 5.
4. Press button
change the setting. Each time you press
the button you select the next level.
5. Deactivate the appliance to confirm the
setting.
Water softener
adjustment
Level
10
9
8
7
6
1)
5
4
3
2
2)
1
contin-
.
again and again to