Garlando MULTI 12 IN 1 Aufbau- Und Bedienungsanleitung Seite 23

Assembly
Please read the User Manual carefully before starting with the assembly!
Always have two adults assemble the Multi-Game Table!
Open the box where you also intend to set up the Multi-Game Table. Select a place where you have enough room and a flat
floor.
Take all the parts out of the box and check for completeness against the Parts List.
Make sure during the assembly of the Multi-Game Table 12 in 1 that all the parts are in the places indicated in the
illustrations. Make sure that all the parts are screwed tight when assembled.
Step 1
Open the box where you intend to set up the Multi-Game Set. Select a place where you have enough room and a flat floor.
IMPORTANT: First of all, the table is assembled upside-down and then placed on its legs.
Take the basic frame out of the packaging and place the table upside-down on the floor. Attach the side panel (#1) to the
frame.
Make sure that the side with the groove points inwards. Insert the individual rods with the player figures in the holes provided.
The correct positions for the rods are shown in Fig. 1.
Goalkeeper rod with 1 blue player (#11)
Defender rod with 2 blue players (#10)
Striker rod with 3 red players (#5)
Midfielder rod with 5 blue players (#8)
Midfielder rod with 5 red players (#4)
Striker rod with 3 blue players (#9)
Defender rod with 2 red players (#6)
Goalkeeper rod with 1 red player (#7)