Cleaning And Care - Silvercrest SED 3.7 E2 Bedienungsanleitung

Cleaning and Care

RISK OF ELECTRIC SHOCK
► Before cleaning, disconnect the appliance from the mains
power adapter
main power supply.
WARNING - PROPERTY DAMAGE!
► NEVER submerse the appliance in water or other liquids!
■ After every use clean the epilator head
cleaning brush
■ Disinfect the epilator head
it with disinfectant spray.
■ To thoroughly clean the epilator head
the appliance:
― Press the two restraint fixtures
time pull the epilator head
― Clean the epilator head
allow it to dry.
― Place the epilator head
that the gears on the epilator head
mesh with each other. The epilator head
engage.
■ Clean the appliance housing and the mains power adapter
with a moist cloth. If required, use some mild detergent on the cloth.
Ensure that the appliance is completely dry before the next use.
SED 3.7 E2
and the mains power adapter
to remove loose hairs.
regularly by spraying and cleaning
under running water and then
back onto the appliance. Ensure
with the supplied
you can remove it from
together and at the same
upwards.
and on the appliance
must audibly
from the
│
13 ■
GB