Specifications - Philips PR3092 Bedienungsanleitung

ENGLISH
26
Problem
The charging light turns
solid red for 5 seconds,
the BlueTouch Pain Relief
Patch beeps and it is not
possible to select a mode.
The charging light is solid
orange.
The adapter becomes
warm during charging.
The charging light does
not start flashing green
when the micro USB
plug is inserted into the
micro USB socket on the
connection panel.
The BlueTouch Pain Relief
Patch becomes warm
during use.
Model
Rated voltage
Rated frequency
Rated input
Class
Classification
Ingress of water
Possible cause
The rechargeable
batteries are empty.
The batteries contain just
enough energy for one
treatment.
This is normal.
The adapter is not
inserted or not inserted
properly into the wall
socket.
The standard USB plug
is not inserted or not
inserted properly into the
adapter.
The wall socket into
which the adapter is not
live.
This is normal.

Specifications

Solution
Charge the BlueTouch Pain Relief Patch
(see chapter 'Charging').
Complete the treatment and charge
BlueTouch Pain Relief Patch after use
(see chapter 'Charging').
No action required.
Insert the adapter into the wall socket
properly.
Insert the standard USB plug into the adapter
properly.
Connect another appliance to the same socket
to check if the socket is live. If the wall socket
is live, but the BlueTouch Pain Relief Patch
does not charge, contact Philips.
No action required.
PR3092
100-240 V
50-60 Hz
15 W
Medical device Class IIa
Risk Group 1 (according to IEC60601-2-57)
IP22