➌ Preparation And Connection; Setting Up The Mx-1 - Elmo MX-1 Bedienungsanleitung

➌ PREPARATION AND CONNECTION

■SETTING UP THE MX-1

①Raise the body while holding the operating panel.
③Raise the camera head. Set it horizontally.
②Raise the arm as indicated by an arrow.
Caution
・Be careful not to pinch your fingers
when moving the arm.
・Do not hold the arm or camera head
when carrying the MX-1.
・Be careful not to give an impact to the
camera head.
37
日
本
語