Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Controls and description
6.
5.
4.
3.
2.
1.
1.
Power-Switch
2.
AUTO CURRENT CUT OFF PROTECTION KEY: After power ON. The power supply will at
protection state (no voltage output at all terminals and OUTPUT indicator [6] is OFF). When
the Auto Current Cut off protection key is pressed, all terminals will output the voltage as
indicated on the voltage display panel and the OUTPUT indicator [6] is ON. Repress the key
to cut off the output again. After cut off, it takes 3 seconds interval to return normal.
3.
OUTPUT INDICATOR: see[2]
4.
CH1 CURRENT tune knob: Turn clockwise for increasing the current value; turn anti-
clockwise for decreasing the current value. When in SERIES/PARALLEL TRACKING MODE,
use this knob to adjust CH1 current.
5.
CH1 CV/CC (CONSTANT VOLTAGE/CURRENT MODE) INDICATOR: When CH1 is at the
constant voltage mode, this LED light will be on as green color. When CH1 is at the current
mode and in Parallel Tracking Mode, this LED light will be on as red color.
6.
CH1 VOLTAGE tune knob: Turn clockwise for increasing the voltage value; turn anti-
clockwise for decreasing the voltage value. When in SERIES/PARALLEL TRACKING MODE,
use this knob to adjust CH1 voltage.
7.
CH1 VOLTAGE DISPLAY PANEL: This display will indicate CH1 voltage value that will be
applied to the circuit.
8.
CH1 CURRENT DISPLAY PANEL: This display will indicate CH1 current value that will be
applied to the circuit
9.
CH2 VOLTAGE DISPLAY PANEL: This display will indicate CH2 voltage value that will be
applied to the circuit
10. CH2 CURRENT DISPLAY PANEL: This display will indicate CH2 current value that will be
applied to the circuit
7.
8.
17.
16.
22.
21.
10.
9.
20.
19.
18.
-13-
17.
16.
11.
12.
13.
14.
15.
0
Werbung
Inhaltsverzeichnis
