Operation; Operating Elements - Endress+Hauser RMA42 Handbuch

RMA42
Are all terminals firmly engaged in their correct slot? Is the coding on the
individual terminals correct?
Are the mounted cables strain-relieved?
Are the power supply and signal cables correctly connected?
6

Operation

The easy operating concept of the device makes it possible for users to commission the device
for many applications without a printed set of Operating Instructions.
The FieldCare operating software is a quick and convenient way of configuring the device.
Brief explanatory (help) texts provide additional information on individual parameters.
6.1

Operating elements

6.1.1 Local operation at the device
The device is operated by means of the three keys integrated in the front part of the device
• Open the configuration menu
• Confirm an entry
• Select a parameter or submenu offered in the menu
Within the configuration menu:
• Scroll step-by-step through the parameters/menu items/characters offered
• Change the value of the selected parameter (increase or decrease)
Outside the configuration menu:
Display enabled and calculated channels, as well as min. and max. values for all the active channels.
You can always exit items/submenus at the end of the menu by selecting "x Back".
Leave the setup directly without saving the changes by pressing the '-' and '+' keys
simultaneously for > 3 s.
6.1.2 Configuration via interface & FieldCare Device Setup PC configuration software
CAUTION
L
Undefined switching of outputs and relays possible while configuring with FieldCare
‣
Do not configure during running process.
To configure the device with the FieldCare Device Setup software, connect the device to your
PC. You need a special interface adapter for this purpose, e.g. the Commubox FXA291.
Endress+Hauser
-
-
See the wiring diagram on the
housing.
Operation
39