Safety Instructions; Requirements For Personnel; Designated Use; Workplace Safety - Endress+Hauser RMA42 Handbuch

RMA42
Symbol Meaning
Open-ended wrench
A0011222
Torx screwdriver
A0013442
2

Safety instructions

2.1

Requirements for personnel

The personnel must fulfill the following requirements for its tasks:
‣
Trained, qualified specialists must have a relevant qualification for this specific function
and task.
‣
Are authorized by the plant owner/operator.
‣
Are familiar with federal/national regulations.
‣
Before starting work, read and understand the instructions in the manual and
supplementary documentation as well as the certificates (depending on the application).
‣
Follow instructions and comply with basic conditions.
2.2

Designated use

The process transmitter evaluates analog process variables and displays them on its
multicolored screen. Processes can be monitored and controlled with the unit' s outputs and
limit relays. The device is equipped with a wide array of software functions for this purpose.
Power can be supplied to 2-wire sensors with the integrated loop power supply.
• The device is an associated apparatus and may not be installed in the hazardous area.
• The manufacturer accepts no liability for damages resulting from incorrect use or use other
than that designated. It is not permitted to convert or modify the device in any way.
• The device is designed for operation in an industrial environment and may only be operated
in an installed state.
2.3

Workplace safety

For work on and with the device:
‣
Wear the required personal protective equipment according to federal/national
regulations.
2.4

Operational safety

Risk of injury.
‣
Operate the device in proper technical condition and fail-safe condition only.
‣
The operator is responsible for interference-free operation of the device.
Endress+Hauser
Safety instructions
29