Function Description; Technical Data - FLORABEST FKS 2200 E3 Originalbetriebsanleitung

GB
23 Bar bolt
F
24 Tensioning plate
G
25 Sprocket
26 Tab
J
27 Oil passages
28 Fixing screw
29 Clamping screw bolt

Function description

The chainsaw is driven by an electric mo-
tor. The circulating chain is led around a
saw bar (guide rail)
The tool is fitted with a rapid-action chain-
tensioning system and a fast-acting chain
brake. An automatic oil dosing regulator
ensures continuous chain lubrication.
The chainsaw is equipped with various
protection fittings for the protection of the
user.
Refer to the following descriptions for the
function of control elements.

Technical Data

Electrical chainsaw ................FKS 2200 E3
Rated input voltage .......... 230 V~, 50 Hz
Input power ...............................2200 W
Safety class ......................................
Protection category...........................IP20
Chain speed .............................13.6 m/s
Weight (without guide rail and chain) 4.7 kg
Weight (with guide rail and chain) ..5.9 kg
Oiltank ....................................... 270 ml
Chain ..........................Oregon 91P057X
Chrome cutting teeth, low-kickback
Chain bar .. Oregon 160SDEA041-112364
Chain link separation ................... 10 mm
Chain width ............................... 1.3 mm
Teeth of the sprocket chain wheel ........... 7
32
Length of the chain bar ............... 460 mm
Sawing length ........................... 395 mm
Acoustic pressure level
(L ) .................. 96.0 dB (A); K
pA
Sound power level (L
measured ............. 108 dB (A); K
guaranteed .............................. 112 dB(A)
Vibration (a ) ...... 6.97 m/s
h
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration of
conformity.
Technical and optical changes can be
carried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the basis
of the instruction manual, cannot thus be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
II value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on esti-
mated exposure under actual usage
conditions (all parts of the operating
cycle are to be considered, includ-
ing, for example, times during which
the power tool is turned off and
times when the tool is turned on but
is running idle).
= 3 dB
pA
)
WA
= 3 dB
WA
; K= 1.5 m/s
2 2