Electronic Programmer; Setting The Time Of Day - Electrolux EON 33000 Gebrauchsanleitung

Electronic programmer

5
6
2
The oven will work only if the time of day has
been set. Moreover, the oven can also be operated
without any programme.
In the event of a power failure, all the settings (time
of day, programme setting or programme in
operation) will be cancelled.
When the power is restored, the numbers in the
display will flash, and the clock/timer has to be
reset.

Setting the time of day

When the power supply is switched on, or after a power
failure, the "Time of day" pilot lamp
display.
To set the correct time of day:
1. press button " " or " ".
2. After the setting is carried out, wait for 5 seconds: the
"Time of day" pilot lamp
will show the set time. The appliance is ready for use.
To reset the correct time of day:
1. press button
day" function. The relevant pilot lamp will start flashing.
Then proceed as described above.
The time of day may be reset only if no automatic
function (cook duration
been set.
42 electrolux
4
1
3
will go out and the display
repeatedly to select the "Time of
or end of cooking
1. Push button for selecting a function
2. Decreasing control button " "
3. Increasing control button " "
7
4. Display
8
5. "Cooking Duration" pilot lamp
6. "End of cooking" pilot lamp
7. "Minute minder" pilot lamp
8. "Time of day" pilot lamp
will flash on the
) has