Control Panel; Electronic Programmer - Electrolux EOC69900 Benutzerinformation

6 electrolux
3. Set function
ature.
4. Let the appliance operate without the
food for approximately 10 minutes.
5. Set function
ature.
6. Let the appliance operate without the
food for approximately 10 minutes.

CONTROL PANEL

ELECTRONIC PROGRAMMER

6
Touch the sensor field to operate the appliance.
Sensor
field
,
1
2
3
4
-
5
6
and maximum temper-
and maximum temper-
5
Function
To move between the main menus.
Right, Left
OK To confirm. To start the set function.
To move in the submenus. To set the settings in the subme-
nus. (example: temperature, time, weight).
To set the values:
Down Up
• Touch the sensor field one time: To set the value in slow
steps
• Hold down the sensor field: To set the value in fast steps
Display Shows the current settings of the appliance.
Home To cancel the selection and go back to the main menu.
On / Off To activate and deactivate the appliance.
This is to burn off the residue in the appli-
ance. The accessories can become more
hot than usually. When you pre-heat the
appliance for the first time, the appliance
can make an odour and smoke. This is the
usual effect. Make sure the airflow is suffi-
cient.
1
4
Comment
It does not interrupt a heating function or programme
which operates.
3 2