Building-In - Electrolux EON 33000 Gebrauchsanleitung

Building-in

To ensure correct operation of the built-in
assembly, the kitchen cabinet and the recess
for the built-in appliance must have suitable
dimensions. When the appliance is fitted-in,
there must be no open spaces left and it
must be closed on all sides by the kitchen
furniture to prevent the possibility of
inadvertently touching "live" (current carrying)
parts of the oven. All parts ensuring such a
protection, including any covering panel (for
instance, if the appliance is installed at the
end or at the beginning of a kitchen counter)
must be fastened in such a way as to prevent
removal of the same without the aid of some
tool. This appliance can be placed with its
back and with one side close to appliances
or walls of higher height. The other side,
instead, must be placed close to furniture or
appliances, having the same height.
Overall oven dimensions (Fig. 21)
Building-in under a kitchen
counter
The recess must have the dimensions
shown in Fig. 22. Before carrying out the
building-in of the oven, connect it to the hob
(see corresponding chapter); then recess
completely the oven under the counter; open
the oven door and secure the oven to the
kitchen cabinet .
Securing the oven to the cabinet
- Fit the appliance into the cabinet recess.
- Open the oven door and secure the oven
to the kitchen cabinet by placing the four
distance holders (A) in the holes provided
in the oven frame and then inserting the
four wood screws (B) (Fig. 23).
60 electrolux
Fig. 21
Fig. 22
Fig. 23