Replacing The Oven Light - Electrolux EON 33000 Gebrauchsanleitung

Oven Shelves and Shelf Supports
The shelf support rails on the left and right
hand sides of the oven can be removed for
cleaning the side walls.
Removing the shelf support rails
First pull the front of the rail away from the oven
wall and then unhitch at the back (15, 16).
Fitting the shelf support rails
To install, first reattach the rails at the back,
then put them into position at the front and
press them into place (17).To clean the shelf
support rails, soak in warm soapy water and
remove stubborn marks with a well wetted
soap impregnated pad. Rinse well and dry
with a soft cloth.

Replacing the oven light

Disconnect the appliance from the
electricity supply.
If the oven bulb needs replacing, it must
comply with the following specifications:
electric power, 15 W/25 W; electric rate, 230
V (50 Hz); resistant to temperatures of 300°C;
connection type: E14. These bulbs are
available from your local Service Force Centre.
To replace the faulty bulb:
1. Ensure the oven is disconnected from the
electrical supply.
2. Turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace it with
the new one.
4. Refit the glass cover.
5. Reconnect to the electrical supply.
54 electrolux
15
16
17