Safety Thermostat - Electrolux EON 33000 Gebrauchsanleitung

Hotplate control knobs
The control knobs for the hotplates (Fig. 4)
can be found on the oven control panel. The
energy regulator of the hotplates can be set
by means of a 7-position control knob:
0 = OFF
1 = Minimum
9 = Maximum
The intermediate positions give an
increasing heating power.
Double circuit cooking zone (Fig. 5)
If you wish to have the two electric circuits
work simultaneously, turn the knob to
maximum position 9 and then turn it
towards symbol "0". You will hear a click.
Now the 2 circuits work together.
Then, you can regulate the power of the
cooking zone by turning the control knob
anticlockwise.
Carefully supervise cookings with
oil or fats, since these types of
food can result in a fire, when
over-heated.

Safety thermostat

In order to avoid excessive overheating due
to incorrect use of the appliance or else to a
faulty component, the oven is equipped with
a safety thermostat which cuts off the power
supply if necessary. Operation is restored
automatically when the oven temperature
decreases to normal values. Therefore, if the
thermostat cuts in because you have not
been using the appliance correctly, the oven
can be used again simply by waiting for the
appliance to cool down. If, instead, the
thermostat cuts in because of a faulty
component, you should call the Service
Department.
The Cooling Fan
This oven is provided with a cooling fan,
meant to keep the front panel, the knobs
and the oven door handle cool. The fan
switches on automatically after a few
minutes of cooking. Warm air is blown out
through the aperture near the oven door
handle. When the oven is switched off, the
fan will remain on in order to to keep the
controls cool, after which it switches off
automatically.
Fig. 4
Fig. 5
electrolux 41