Clock Functions; Electronic Programmer - Electrolux EON3410 Benutzerhandbuch

6. CLOCK FUNCTIONS

6.1 Electronic programmer

1
6
Clock function
You can use Duration
time when the appliance must be
activated and then deactivated.
First set Duration
6.2 Setting the clock functions
1.
For Duration
oven function and temperature. This
is not necessary for the Minute Mind-
er
2. Press the Selection button again and
again until the indicator for the neces-
sary clock function flashes.
2
hr min
5
Time of day To set, change or check the time of day.
Minute Minder To set a countdown time. This function has no effect on
the operation of the oven.
Duration To set how long the appliance must operate.
End To set when the appliance must be deactivated.
at the same time to set the
, then End
.
and End
.
Function indicators
3
1
Time display
2
Function indicator
3
Button +
4
Selection button
5
Button -
6
4
Application
and End
, set an
3.
Press + or - to set the time for the
necessary clock function.
The display shows the indicator for
the clock function you set. When the
set time ends, the indicator flashes
and an acoustic signal sounds for two
minutes.
4. Press a button to stop the signal.
5. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
ENGLISH
hr min hr min
With the Duration
functions, the appliance deacti-
vates automatically.
9
and End