Responsibility Of The Operator; Personnel Qualification - WIKA LGG Betriebsanleitung

3. Safety

3.4 Responsibility of the operator

The instrument is used in the industrial sector. The operator is therefore
responsible for legal obligations regarding safety at work.
The safety instructions within these operating instructions, as well as the
safety, accident prevention and environmental protection regulations for
the application area must be maintained.
To ensure safe working on the instrument, the operating company must
ensure the following:
The operating personnel are regularly instructed in all topics regard-
■
ing work safety, first aid and environmental protection and know
the operating instructions and in particular, the safety instructions
contained therein.
The operating personnel have read the operating instructions and
■
taken note of the safety instructions contained therein.
The intended use for the application is complied with.
■
Following testing, improper use of the instrument is excluded.
■

3.5 Personnel qualification

WARNING!
Risk of injury should qualification be insufficient
Improper handling can result in considerable injury and
damage to equipment.
▶
The activities described in these operating instructions
may only be carried out by skilled personnel who have
the qualifications described below.
Skilled personnel
Skilled personnel, authorised by the operator, are understood to
be personnel who, based on their technical training, knowledge of
measurement and control technology and on their experience and
knowledge of country-specific regulations, current standards and direc-
tives, are capable of carrying out the work described and independently
recognising potential hazards.
Operating instructions, sight glass level indicator, model LGG
EN
11