Installing The Appliance - Küppersbusch IKE458014T Benutzerinformation

18
140-190 mm
1
2
Alignment height of 870 mm
• If using a 190 to 220 mm plinth, make a
cut out as shown.
30-100 mm
• If using a plinth higher than 150 mm but
less than 190 mm, cut the height
compensation strip supplied with the
appliance to the required depth and fit it
between the plinth and the ventilation
grille.
• If using a 150 mm plinth, fit the complete
height compensation strip.
• If the appliance is installed at the end of
a row of units, insert foot E to hold the
plinth in place.
3
100-150 mm
1
E

Installing the appliance

1. Fit the appliance into the recess.
2. Rotate the bracket of 180° in order to
obtain the right position ( 2). The
position (1) is on the delivery.
3. Fix it to the wall with the appropriate
bracket.
4. The top of the appliance must be kept
clear to allow better air circulation. If a
wall unit is fitted above the appliance,
there must be a gap of 50 mm between
this unit and the wall and it must be at
least 50 mm below the ceiling.
2
1
2