Door reversibility
Installing the appliance
Caution! Make sure that the mains
cable can move freely.
x
The door of the appliance opens to the
right. If you want to open the door to the
left, follow these steps before you install the
appliance:
1. Loosen and remove the upper pin.
2. Remove the door.
3. Remove the spacer.
4. With a key, loosen the lower pin.
On the opposite side:
1. Tighten the lower pin.
2. Install the spacer.
3. Install the door.
4. Tighten the upper pin.
Do the following steps:
If necessary cut the adhesive sealing strip
and apply it to the appliance as shown in
figure.
x
23