Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Switching Off; Temperature Regulation; Temperature Indicator - Küppersbusch IKE458014T Benutzerinformation

Vorschau ausblenden Andere Handbücher für IKE458014T:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

OPERATION

Freezer Control panel
1
2
3
4
1. Pilot light
2. ON/OFF switch
3. Temperature regulator (warmest)

4. Temperature indicator

5. Temperature regulator (coldest)
6. Alarm light
7. Alarm reset switch
8. FastFreeze light
9. FastFreeze switch
Switching on
1. Insert the plug into the wall socket.
2. Press the ON/OFF switch.
The Pilot Light will light up.

Switching off

The freezer is shut off by pressing ON/OFF
switch until the Pilot light and the
Temperature indicator switched off.

Temperature regulation

The temperature can be adjusted between
-15°C and -24°C.
By pressing the Temperature regulators ,
the current temperature setting flashes on
the Temperature indicator. It is possible to
modify the setting temperature only with
flashed indicator. In order to set a warmer
temperature, it is necessary to press
warmest Temperature regulator. To set a
colder temperature-coldest Temperature
regulator. The Temperature indicator
displays the newly selected temperature for
a few seconds and then shows again the
inside compartment temperature.
The newly selected-temperature must be
reached after 24 hours.
5 6 7 8
9
During the stability period by the
first starting the temperature
displayed can not correspond to
the setting temperature.
Temperature indicator
During normal functioning the Temperature
indicator shows the temperature inside the
freezer.
The difference between the
temperature displayed and
temperature setting is normal,
especially when:
• a new setting has recently
been selected
• the door has been left open
for a long time
• warm food has been placed
in the compartment.
High temperature alarm
In the event of the abnormal temperature
rise inside the freezer (e.g. power cut) Alarm
light will start to flash and a buzzer will
sound.
After the temperature has returned to
normal, the Alarm light will continue to flash,
although the buzzer has stopped.
When the Alarm reset switch is pressed,
the warmest temperature reached in the
compartment flashes on the Temperature
indicator.
5

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis