Height Adjustment; Fitting The Side Panels - Küppersbusch IKE458014T Benutzerinformation

14
Cli- Ambient temperature
mate
class
T +16°C to + 43°C
Some functional problems might
occur for some types of models
when operating outside of that
range. The correct operation
can only be guaranteed within
the specified temperature range.
If you have any doubts
regarding where to install the
appliance, please turn to the
vendor, to our customer service
or to the nearest Authorised
Service Centre.
Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your domestic
power supply.
• The appliance must be earthed. The
power supply cable plug is provided with
a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a qualified
electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the E.E.C.
Directives.

Height adjustment

The height of the appliance is adjustable
from 820 to 870 mm to fine up with existing
kitchen units.
1. Before installing the appliance between
units, adjust the height of the feet and
rear wheels. The wheels are factory set
for a height of 820 mm.
2. To align the appliance to a height of 870
mm, raise it by adjusting the feet with a
spanner, then remove the wheels and
refit them in the lowest position.
820 mm
870 mm

Fitting the side panels

1. Fit the brackets onto the panels in the
positions shown in the diagram.
820-870 mm