Küppersbusch IKE458014T Benutzerinformation Seite 16

16
For a correct alignment make sure that
the distance between the appliance and
the cabinet is of 45 mm.
5. Secure the panels at the front.
6. Fix the squares (contained in the bag) to
the lower part of the door (references
already provided).
7. If necessary, door opening angle max
90° can be obtained by introducing the
pivots supplied separately. See picture.
L
o
90
o
115
L
Fitting the door panels
1. Open a door a remove the bracket
cover. Undo the nuts with washers and
remove the bracket from the door.
1
10 mm
2. Drill the small doors as shown in the
figure.
N
N
2
214
193 193
25
4
1013
4
60
25
6
min. 444
max. 447
• 4. Top right–and front panel
• 5. Top left-hand front panel
• 6. Bottom right-hand front panel
• 7. Bottom left-hand front panel
3. Fix the bracket to the door with the
screws contained in the bag.
4. Refit the bracket on the adjustment
screws and screw the nuts with
washers without tightening them down.
214
193 193
25
5
1013
min. 3
4
60
25
7
min. 444
max. 447
mm