Installing The Appliance - Küppersbusch IKE1780-0E Benutzerinformation

min.
5 cm
200 cm
Installation of the TASTEGUARD
filter
The TASTEGUARD filter is an active carbon
filter which absorbs bad odors and permits
to maintain the best flavour and aroma for
all foodstuffs without risk of odor cross
contamination.
On delivery the carbon filter is in a plastic
bag to preserve performance.
The filter should be placed in the drawer
before the appliance is turned on.
CAUTION! Make sure that the
air lever drawer is closed to
obtain proper function. Handle
the filter carefully so fragments
do not loosen from the surface.
1. Open the drawer.
2. Remove the filter from the plastic bag.
3. Insert the filter in he drawer.
4. Close the drawer.
2
min.
2
200 cm

Installing the appliance

CAUTION! Make sure that the
mains cable can move freely.
1. Apply the adhesive sealing strip to the
appliance as shown in figure.
2. Install the appliance in the niche.
3. Attach the appliance to the niche with 4
screws.
31