Setting And Starting A Programme; Setting Mode - Electrolux ESL 6380RO Benutzerinformation

12 www.electrolux.com
7.2 Setting and starting a
programme
The Auto Off function
To decrease the energy consumption, this
function automatically deactivates the ap-
pliance a few minutes after:
• You have not closed the door to start
the programme.
• The programme is completed.

Setting mode

For some settings it is necessary that the
appliance is in setting mode.
The appliance is in setting mode when,
after the activation, the display shows
programme P1.
If the control panel does not show this
condition, press and hold, at the same
time, Program and MyFavourite until
the display shows programme P1.
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode.
3. Set a programme. Press Program
again and again until the display
shows intermittently the number and
the duration of the programme you
want to set. If you want you can set
the applicable options.
• If you want to set the MyFavourite
programme, press MyFavourite.
4. Close the appliance door. The pro-
gramme starts. The programme dura-
tion starts to decrease with steps of 1
minute.
Starting a programme with delay
start
1. Set the programme.
2. Press Delay again and again until the
display shows the delay time you want
to set (from 1 to 24 hours).
• The display shows intermittently the
programme number, the pro-
gramme duration and the delay
time.
• The Delay indicator comes on.
3. Close the appliance door. The count-
down starts.
• When the countdown is completed,
the programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start while
the countdown operates
Press and hold, at the same time, Pro-
gram and MyFavourite until the display
shows programme P1.
When you cancel the delay start
you have to set the programme
and options again.
Cancelling the programme
Press and hold, at the same time, Pro-
gram and MyFavourite until the display
shows programme P1.
Make sure that there is detergent
in the detergent dispenser before
you start a new programme.
At the end of the programme
When the programme is completed, the
display shows 0:00.
1. Press the on/off button or wait for the
Auto Off function to automatically de-
activate the appliance.
2. Close the water tap.
Important
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.