Technical Data - Electrolux ESF 45030 Benutzerinformation

36 electrolux
Problem
There are streaks, whitish
stains, or a bluish layer on
glasses and dishes.
Dry water drop stains on
glasses and dishes.
The dishes are wet.
The dishes are wet and matt.
How to activate the rinse aid dispenser
1. Switch off the appliance.
2. Press and hold the start /cancel button.
3. Turn the programme knob counter-
clockwise until the programme marker
agrees with the first available washing
programme on the control panel.
4. Release the start/cancel button.
– The display shows the electronic ad-
justment of the water softener.
5. Turn the programme knob counter-
clockwise until the programme marker
agrees with the second available wash-
ing programme on the control panel.
– The display shows the current set.

TECHNICAL DATA

Dimensions
Electrical connection
Water supply pressure
1)
Water supply
Possible cause
The salt container cap is not
closed correctly.
The rinse aid quantity is too
high.
The rinse aid quantity is too
low.
The detergent can be the
cause.
The washing programme was
without a drying phase or with
a decreased drying phase.
The rinse aid dispenser is emp-
ty.
The multitab function is on (this
function automatically deacti-
vates the rinse aid dispenser).
Rinse aid dispenser
deactivated
Rinse aid dispenser
activated
Width
Height
Depth
Voltage
Overall power
Fuse
Frequency
min.
max.
Cold water or hot water
Make sure that the salt contain-
er cap is closed correctly.
Decrease the rinse aid quantity.
Increase the rinse aid quantity.
Use a different brand of deter-
gent.
For better drying results, keep
the door ajar for some minutes.
Fill the rinse aid dispenser with
rinse aid.
Activate the rinse aid dispenser.
6. Press the start/cancel button to change
the set.
– The display shows the new adjust-
ment.
7. Turn the programme knob to off posi-
tion to keep the operation.
Possible solution
446 mm
850 mm
620 mm
220-240 V
2100 W
10 A
50 Hz
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
max. 60 °C