Electrolux ESF 45030 Benutzerinformation Seite 25

Programme guide
This guide helps you in the selection of the
washing programme.
Programme knob
With the programme knob you can:
• Activate and deactivate the appliance
• Set a washing programme
• Adjust electronically the level of the water
softener (refer to 'Setting the water soft-
ener')
• Activate or deactivate the rinse aid dis-
penser (only with the multitab function
on).
To activate the appliance and set a
washing programme
Turn the programme knob until the pro-
gramme marker is aligned with one of the
washing programmes on the control panel.
• If the programme marker is aligned with a
washing programme, the digital display
shows the programme time.
• If the programme marker is not aligned
with a washing programme, the display
shows two horizontal status bar.
To deactivate the appliance
Turn the programme knob until the pro-
gramme marker is aligned with the off posi-
tion.
Start/cancel button
Use the start/cancel button for these opera-
tions:
• To start the washing programme. Refer
to 'Select and start a washing pro-
gramme'.
• To cancel a washing programme in pro-
gress. Refer to 'Select and start a wash-
ing programme'.
• To adjust electronically the level of the
water softener. Refer to 'Setting the wa-
ter softener'.
• To deactivate/activate the rinse aid dis-
penser when the multitab function is on.
Refer to 'What to do if...'.
Multitab button
Press this button to activate or deactivate
the multitab function. Refer to 'Multitab
function'.
Delay start button
Press this button again and again to delay
the start of the washing programme from 1
to 19 hours.
Display
The display shows:
• The electronic adjustment of the level of
the water softener
• The activation and deactivation of the
rinse aid dispenser (only with the multitab
function on)
• The time of the washing programme
• The remaining time to the end of the
washing programme
• The end of a washing programme (the
display shows a zero)
• The time of the delay start
• The alarm codes.
Setting mode
The appliance must be in setting mode
for these operations:
• To set a washing programme.
• To set a delay start.
• To adjust electronically the level of the
water softener.
• To activate or deactivate the rinse aid
dispenser (only with the multitab function
on).
Activate the appliance. The appliance
is in setting mode when:
• The time of the last set washing pro-
gramme flashes in the display.
• The indicators of the phases of the wash-
ing programme come on.
Activate the appliance. The appliance
is not in setting mode when:
• The time of the washing programme or of
the delay start do not flash in the display.
• Only one phase indicator is on.
– It is necessary to cancel the pro-
gramme or the delay start to go back
to the setting mode. Refer to 'Select
and start a washing programme'.
electrolux 25