Water Connection - Pkm WA6-E1514 Bedienungsanleitung

1. Use the supplied hose-set only. Do not use any used components for
connecting the appliance to the water supply.
2. Appliances with a single inlet valve can be connected to the cold-water supply
8
only.
3. Appliances with two inlet valves can be connected to the cold-water supply as
well as to the warm-water supply.
Connect the water inlet as described in the
figure. If your appliance is equipped with a
warm-water inlet, connect the warm-water tap
with the warm-water inlet.
Connect the hose to the tap and the appliance
(elbow on the appliance). Tighten clockwise.
If water drains out after connection, repeat the entire procedure. If your tap does
not meet the dimensions of the connectors, you must install a suitable tap.
1. Lead the drain hose into a collection device, e.g.
a basin.
2. Connect the water outlet with the drain of a collection device, e.g. a basin.
8
Equipment depends on model.
9
Equipment depends on model.

Water connection

9
Water supply
Drain water
34